Cortelco Colleague 2220 Owner's Instruction Manual page 13

5 . When [ SELECT LINE1/2? ] appears, "1. LINE 1"and "2. LINE 2" will flash and you
may select line 1 or 2 as the prime line.
a. The default setting for prime line is Line1. The prime line is the automatically
selected when the handset is lifted, or handsfree is pressed.
b. Press 1 button to select LINE 1, or Press 2 button to select LINE 2. The check
mark moves to the selection you have made.
c. Press DOWN button to confirm, and the screen will display the next setting
option.
6 . When [ DIAL MODE ] appears, 1. P (Pulse) and 2. T (Tone) will flash and you may
select Tone or Pulse Dialing.
a. Press 1 button to select TONE, or Press 2 button to select PULSE. The check
mark moves to the selection you have made.
b. Press DOWN button to confirm, and the screen will display the next setting
option, or press OPTION button to skip the programming.
Note : In order for the Caller ID callback to work (see Using the Caller ID Function), you
must set the PULSE/TONE switch to the Tone position.
7. You have now completed the necessary programming.TOTAL:00 NEW:00" appears
in the display. This is the initial standby screen. The Date/Time is set when a Caller
ID call is received. This telephone will keep the current time accurately, and is
updated each time a CID number is received. After you have set up the unit
completely for the first time, use the OPTIONS button to review or reprogram the
Language, Area Code, Access Code, Flash Timer, Line Status or Dial Mode.
5