Step 3 Insert The Batteries Into The Remote; Connect A Vcr - Sony TRINITRON KV-HR36M91 Service Manual

Getting Started (continued)

Connect a VCR

To play a video tape, press t (see page 18).
To antenna
output
AUDIO
To video and
audio outputs
: Signal flow
Step 3
Insert the batteries into
the remote
8
Using Your New TV
Antenna cable (not supplied)
VCR
S video cable
(not supplied)
VIDEO
To
(S video
To S
input)
video
output
Audio/Video cable
(not supplied)
Notes
• If you connect a monaural VCR, connect the yellow plug to
jack) and the black plug to -L (MONO) (the white jack).
• If you connect a VCR to the 8 (antenna) terminal, preset the signal
output from the VCR to the program number 0 on the TV.
• When you connect a VCR to the S video input, display the "Setup" menu
and select "Auto" for "S Input" (see page 86). If the signals are input to
both (S video input) and
automatically selected. To view the video signal input to
select "Off" for "S Input".
Note
• Do not use old batteries or different types of batteries together.
To 8 (antenna)
Rear of TV
To t 1, 2 or 3 (video input)
-L (MONO) (white)
-R (red)
(video input), the S video signal is
Y
Y
HD
G
SYNC
P /
B
C
VD
B
B
P /
R
C
R
R
L
R
2
(yellow)
(the yellow
(video input),