Maintenance - ACDelco ARG1207 Product Information Manual

WARNING
NOTE
This tool is lubricated before it leaves the factory. This lubrication
should last for the life of the tool. No further lubrication is required.
1. When servicing, use only identical parts. Use of any other part may create a hazard
or cause product damage.
2. DO NOT use solvents when cleaning plastic parts. Most plastics are susceptible to
damage from various types of commercial solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust, oil, grease etc.
3. DO NOT at any time allow brake fluids, gasoline, petroleum-based products,
penetrating oils, and etc. to come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy plastic.
4. DO NOT abuse power tools. Abusive practices can damage the tool as well as the
workpiece.
5. DO NOT attempt to modify this rotary tool or create accessories not recommended
for use. Any such alteration or modification is misuse and could result in a
hazardous condition leading to possible serious injury.
warranty.
CLEANING
With the motor running, blow dirt and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this. Exterior plastic parts may be
cleaned a damp cloth and mild detergent. Although these parts are highly are solvent
resistant, NEVER use solvent.
1English1

MAINTENANCE

Remove the battery pack from this tool before cleaning solutions.
English -14
It will also void the