Maintenance - ACDelco ARI12104 Product Information Manual

Socket Size: Failure to use the correct socket size will cause a reduction in fastening
torque.
Variable Speed Trigger Switch: Operating the tool at a reduced speed will reduce the
fastening torque.
Bolt Size: Larger bolt diameters generally require higher fastening torque. Fastening
torque will also vary according to length, grade, and torque coefficient.
Material: The type of material and surface finish of the material will affect fastening
torque.
Fastening Time: Longer fastening time results in increased fastening torque. Using a
longer fastening time than recommended could cause the screws to be overstressed,
stripped or damaged.
NOTE
Continuous use in variable speed range is not recommended. It may damage the
switch and should be avoided.
NOTE
When change the position of the control button, making sure the variable speed
switch is released.
NOTE
The first time the tool is run after changing the direction of rotation, you may hear a
click on start up. This is normal and does not indicate a problem.
WARNING
NOTE
This tool is lubricated before it leaves the factory. This lubrication
should last for the life of the tool. No further lubrication is required.
BATTERY POWER INDICATOR
Use the Battery Power Indicator to show the battery pack's remaining capacity. Press
the
Variable Speed Switch (6)
1. One light ON: 30% remaining capacity.
2. Two lights ON: 60% remaining capacity.
3. All lights ON: 100% remaining capacity.
1English1

MAINTENANCE

Remove the battery pack from this tool before cleaning solutions.
to display the lights:
English -8