Protecting The Environment - ACDelco ARG1207 Product Information Manual

MANDREL AND DRUM SANDER ASSEMBLY (not included)
Mandrel
Screw mandrel
Drum sander
Before disposing of damaged, check with your state Environmental Protection Agency
to find out about special restrictions on the disposal of tool or return them to a certified
service center for recycling.
NOTE
For reference only – All items & specification may differ from purchase.
ACDelco, ACDelco Emblem and the ACDelco related graphics are General Motors
Trademarks used under license to Mobiletron Electronics Co., Ltd.
1English1
Thread a felt polishing wheel or a felt-polishing tip on to the screw
carefully, and thread down straight on it. Then turn to the collar.
Loosen and remove the screw at its tip. Place a wheel or a disc
between the rubber trays. Then tighten the screw. The work
posture is shown here.
Just loosen the screw to shrink the drum (if a old sanding band is
on it, slide the band off). Then slide a sanding band on and tighten
the screw to broaden the drum.

PROTECTING THE ENVIRONMENT

English -17