DFI SB100-NRM User Manual page 56

3
BIOS Setup
ACPI Power Management Confi guration
This section is used to confi gure the ACPI Power Management.
ACPI Power Management Confi guration
ACPI Sleep State
Resume by PME
Resume by PS2 KB (S1, S3)
Resume by PS2 MS (S1, S3)
Resume by Ring
Resume by RTC Alarm
ACPI Sleep State
Selects the highest ACPI sleep state the system will enter when the Suspend
button is pressed.
S1(POS)
S3(STR)
Resume by PME
Enable this fi eld to use the PME signal to wake up the system.
Resume by PS2 KB (S1, S3)
About resume by PS2 KB (S1, S3); Options are enabled or disabled.
Resume by PS2 MS (S1, S3)
About resume by PS2 MS (S1, S3); Options are enabled or disabled.
Resume by Ring
Set this fi eld to Enabled to use the modem ring-on function. This will allow
your system to power-on to respond to calls coming through an external or
internal modem.
Resume by RTC Alarm
When Enabled, the system uses the RTC to generate a wakeup event.
56
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
[S1 (CPU Stop Clock) ]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Enables the Power On Suspend function.
Enables the Suspend to RAM function.
Select the highest ACPI
sleep state the system will
enter, when the SUSPEND
button is pressed.

Select Screen

Select Item
Enter: Select
+/ -:
Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit