I/O Connectors; S/Pdif Connector - DFI SB100-NRM User Manual

2
Hardware Installation

I/O Connectors

S/PDIF Connector

SPDIF out
Key
Ground
SPDIF in
+5V
1 5
1
The S/PDIF connector is used to connect an external S/PDIF port. Your S/PDIF
port may be mounted on a card-edge bracket. Install the card-edge bracket to
an available slot at the rear of the system chassis then connect the audio cable
to the S/PDIF connector. Make sure pin 1 of the audio cable is aligned with pin 1
of the S/PDIF connector.
42