Philips GC 3006 Service Manual page 5

IMPORTANT + ADJUSTMENT AND CONTROLS
IMPORTANT
Due to high voltage of the iron, only the specifi ed cord sets must be used.
NOTES :
1) For standardisation reasons :
Type plate : No info. about the typenumber and voltage have been stamped onto the typeplate.
When replacing the typeplate, engrave at least typenumber onto the typeplate with a sharp object.
2) After the product had been repaired, it should function properly and has to meet the safety requirements and
legal regulations as laid down and offi cially established at this moment.
ADJUSTMENTS AND CONTROLS
Thermostat
Thermostat, fi tted to the soleplate 23 has already been adjusted by the supplier and secured by glue.
To avoid mal-function of the iron, NEVER re-adjust the thermostat.
NOTE : the thermostat can only be ordered together with the soleplate assembly 23.