Specifications - Luxman M-800A Owner's Manual

M-800A Specifications
Rated Continuous output
480W (1Ω)
240W (8Ω) bridged mode (monaural)
Installed capacity 480W + 480W (1Ω)/ stereo
960W (2Ω)/ bridged mode (monaural)
Input sensitivity
773mV/60W (8Ω), GAIN 29dB
Input impedance
Unbalanced RCA 51KΩ, balanced XLR 67KΩ
Harmonic Distortion
0.009% or less
Frequency Response
20Hz~20KHz (+0, - 0.2dB)
Signal-to-Noise Ratio 117dB (IHF-A)
Damping factor 700/8Ω
Attachment Front Panel ： Operation switch, operation indicator and stand-by
Rear Panel ： Mains power switch, Bridge switch (monaural) and input
Accessories Power cable and remote turn on / off cable
(for use with Luxman control amps C-1000f, C-800, C-600).
Power consumption 492W (rated power) 396W (signal less), 0.9W (stand by)
Dimensions
17.25" (W) ×8.8" (H) ×19" (D) mm
Weight 107 lbs. Net 175 lbs shipping
60W + 60W (8Ω)/ stereo, 120W + 120W (4Ω)/stereo, 240W (2Ω),
(1KHz, 60W/8Ω)
60W/ (8Ω)
indicator, input Change-over Switch, balance indicator
and Bridged indicator, level meter, meter display switch
terminal (RCA and balanced; one of each ), speaker
output (1 systems), signal ground terminal and remote
input terminal, line phase sensor and AC inlet
0.1% or less (20Hz – 20KHz,
DC~130KHz (+0dB ~ -3dB)
13