Important Safety Instructions - Luxman M-800A Owner's Manual

The lightning flash with arrowhead,
within an equilateral triangle, is intended
to alert the user to the presence of
uninsulated "dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude to constitute a risk
of electric shock to persons.
WARNING - TO REDUCE RISK OF
FIRE OR ELECTRICAL SHOCK, DO
NOT EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
IMPORTANT SAFETY
INSTRUCTIONS!
PLEASE READ THEM BEFORE
OPERATING THIS EQUIPMENT.
1. Read these instructions.
2. Heed all warnings.
3. Follow all instructions.
4. Do not use this apparatus near water.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
7. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that
produce heat.
8. Protect the power cord from being walked on
or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
The exclamation point within an equi-
lateral triangle is intended to alert the
user to the presence of important
operating and maintenance (servic-
ing) instructions in the literature ac-
companying the appliance.
NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
To prevent the risk of electric shock, do not remove cover or
back plate. No user serviceable parts inside.
9. Only use attachments/accessories specified by
the manufacturer.
10. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
11. Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
12. Do not expose this equipment to
dripping or splashing and ensure that no
objects filled with liquids, such as vases
or beverages, are placed on the
equipment.
13. To completely disconnect this equipment
from the AC. mains, disconnect the
power supply cord plug from the AC
socket.
14. The power supply cord should be kept in
good condition, if it gets chewed up by a
pet, it should be replaced.
3