Intended Use - Scheppach ha 1000 Instruction Manual

to the casing.
• Switch the motor off when leaving the working area.
Disconnect the mains plug.
• Before relocating the machine, even over short dis-
tances, disconnect it from all external power sources!
Reconnect the machine properly to the mains supply
before putting it to operation again!
m Intended Use
This machine complies with the current EC machinery direc-
tive.
• The machine was designed according to the state of
the art and safety standards. Nevertheless, the use of
it might pose a hazard to health or life of the operator
or others, or might have adverse effects on the machine
or other material assets.
• Use the machine only in good technical condition, in
accordance with the intended use, bearing in mind the
safety and possible dangers, and in adherence to the
operating instructions. In particular, faults that might
cause an unsafe condition must be repaired immedi-
ately!
• The exhaust system is intended for removing wood shav-
ings only (not dust).
• Using the machine to remove wood dust and wood shav-
ings in industrial areas is not permitted.
• Regularly inspect the filter for damage. Replace dam-
aged filters! Check tightness of the casing and of the
sealing of filter and shavings bag regularly.
• When you use the cleaning nozzle make sure you do
not suck in objects such as screws, nails, or pieces of
plastic or wood.
• The machine may only be used with original parts and
original accessories from the manufacturer.
• Using the machine to remove wood dust and wood shav-
ings in industrial areas is not permitted. This directive
only applies in Germany.
• Only for collecting shavings (not dust).
• Every other use will be considered unintended use. The
manufacturer assumes no liability for damage arising
from this and it will be solely at the operator's own
risk.
• The manufacture's safety, working, and maintenance
instructions, as well as the dimensions stated in the
technical specifications, must be observed.
• The applicable accident prevention regulations and
other generally accepted rules concerning safety must
be obeyed.
• The machine may only be operated, serviced, or re-
paired by persons familiar with it and aware of the
risks. Arbitrary modifications of the machine exclude
any liability of the manufacturer for damage arising from
this.
• The machine may only be used with original accessories
from the manufacturer.
Fig. 2
4
5
3
Fig. 3
3
Fig. 4
3
1
2
2
1