Installation; Configure The Access Point - D-Link DWL-6700AP Quick Installation Manual

Interfaces
Reset Button
LAN1 Port (PoE in)*
Figure 2. DWL-6700AP Rear Panel
* DWL-6700AP can be powered by the included PoE
adapter from either LAN1 or LAN2

Installation

Power on the access point
Reset Button
LAN (Data in)
Figure 3. PoE Adapter Panel
To power on the DWL-6700AP, you can only use
the proprietary PoE adapter included with the
DWL-6700AP.
1. Connect the supplied PoE adapter and power
cord to the AC power source.
2. Plug one end of an Ethernet cable into the
LAN1 (or LAN2) port of the DWL-6700AP
and the other end into a PoE out from a PoE
adapter.
LAN2 Port (PoE in)*
PoE out
(Connect to DWL-
6700AP's LAN1 or LAN2
POWER IN
Connect the
Power Cord to
the PoE Adapter
LAN
and a power
outlet
Connect Computer to
Ethernet Port labeled
LAN on PoE Adapter
Figure 4. Deployment Example

Configure the access point

To set up and manage the DWL-6700AP, use one
of the following methods:
• LAN1 or LAN2 on DWL-6700AP to Ethernet
Port labeled POE on PoE Adapter
• Connect the Power Cord to the PoE Adapter
and a power outlet
• Connect Computer to Ethernet Port labeled
LAN on PoE Adapter
DWL-6700AP
• Manage the access point from the computer:
Connect the access point and your computer
directly via a straight-through Ethernet cable.
Switch or Router
DWL-6700AP
DWL-6700AP
• Manage the access point from the computer
via the Switch or Router: Connect the access
point and your computer to the same switch
or router.
D-Link DWL-6700AP Quick Install Guide  3
DWL-6700AP
LAN1 or LAN2
on DWL-6700AP
to Ethernet Port
labeled PoE on
PoE Adapter
PoE
Computer
Computer
Computer
Computer