Connect The Phone To A Computer; Sound & Display; Audio Setup - Doro PhoneEasy 626 Manual

•
High (Confirmation may be needed for full access for paired
devices.)
•
Information
2. Press OK to confirm.
Connect the phone to a computer and start transferring pictures, music
and other file types. All you have to do is connect a USB cable between
the phone and computer. From your computer's file explorer, you can
drag and drop content between your phone and the computer.
Note! You might not be able to transfer some copyright protected
material.
Drag and drop content between phone and a computer
1. Connect your phone to a computer using a USB cable.
2. Wait until the phone or memory card appears as external disks in
the file explorer.
3. Drag and drop selected files between the phone and the computer.
Note! You can transfer files using a USB cable on most devices and
operating systems supporting a USB Mass Storage interface.
Disconnect the USB cable safely
1. Make sure to enable the hardware to be safely removed.
2. Disconnect the USB cable.
Note! Computer instructions may vary depending on your operating
system. See the documentation of your computer's operating system for
more information.
Note! Silent needs to be set to Off to access Tone setup, Volume, Alert
type and Extra tone.

Audio setup

If you use a hearing aid or have hearing difficulties when using the device
in a noisy environment, you can adjust the audio settings.

Connect the phone to a computer

Sound & Display
English (US)
30