Changing Hd Radio Reception Mode - JVC KD-AHD69 Instructions Manual

[Turn] .... [Press]
• Repeat this procedure.
While listening to an HD Radio station...
•
i~~~diT
menu is called up.
..
f$
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
[Hold]
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
1
Call up the SET menu.
[Hold]
When astation is tuned in, searching stops.
• Searching for HD Radio stations
only
4
Select /lMONO ON./I
Lights up when holding the digital reception.
Flashes when holding the analog reception.
Select ''TUNER''
-+
"BLEND HOLD"
-+
"AUTO/DIGITALIANALOG"
• If no sound can be heard with" AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "AUTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
[Turn] .... [Press]
[Turn] .... [Press]
[Turn] .... [Press]
To restore the stereo effect, repeat the same
procedure to select "MONO OFF."
Reception improves, but stereo effect will be lost.
3
Select /lMONO./I
2
Select/lTUNER./I
10
[Turn] .... [Press]
• Repeat this procedure.
While listening to an HD Radio station...
•
i~~~diT
menu is called up.
..
f$
Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
[Hold]
Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
1
Call up the SET menu.
[Hold]
When astation is tuned in, searching stops.
• Searching for HD Radio stations
only
4
Select /lMONO ON./I
Lights up when holding the digital reception.
Flashes when holding the analog reception.
Select ''TUNER''
-+
"BLEND HOLD"
-+
"AUTO/DIGITALIANALOG"
• If no sound can be heard with" AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "AUTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the HOLD indicator flashes.
[Turn] .... [Press]
[Turn] .... [Press]
[Turn] .... [Press]
To restore the stereo effect, repeat the same
procedure to select "MONO OFF."
Reception improves, but stereo effect will be lost.
3
Select /lMONO./I
2
Select/lTUNER./I
10