Listening To The Satellite Radio - JVC KD-AHD69 Instructions Manual

Listening to the Satellite Radio
Before operating, connect either one of the following (not supplied) to the expansion port on the rear of this unit.
• JVC SIRIUS Satellite Radio Systein, SC-Cl and KS-SRA100, PnP, SC-VDOCl and KS-SRA100, for listening to the
SIRIUS Satellite Radio.
• XM Satellite Radio System, JVC Smart Digital Adapter-XMDJVC100, CNP2000UC and CNPJVCl for listening to
the XM Satellite Radio.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically. "UPDATING" flashes and no sound can be
heard.
• Update takes afew minutes to complete.
• During update, you cannot operate your Satellite Radio.
1
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
~_=.::::::::::::J
XM Tuner* starts updating all the XM channels.
"Channell" is tuned in automatically.
2
Check your XM Satellite Radio
10
labelled
on the casing of the XM Tuner, or tune in to
"Channel 0" (see page 20).
3
Contact XM Satellite Radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RAOIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4or higher).
1
~~~~.=.:::::::::::
SIRIUS Satellite Radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite Radio tunes in to
the preset channel, CH184.
2
Check your SIRIUS
10
(see page 28).
3
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-S39-SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls on the display
once subscription has been completed.
Activate your SIRIUS subscription after
connection
*
XM Tuner: XMOirect
™
Tuner Box or XMDirect2 Tuner
System
EXTERNAL DEVICES
Continued on the nextpage
19
Listening to the Satellite Radio
Before operating, connect either one of the following (not supplied) to the expansion port on the rear of this unit.
• JVC SIRIUS Satellite Radio Systein, SC-Cl and KS-SRA100, PnP, SC-VDOCl and KS-SRA100, for listening to the
SIRIUS Satellite Radio.
• XM Satellite Radio System, JVC Smart Digital Adapter-XMDJVC100, CNP2000UC and CNPJVCl for listening to
the XM Satellite Radio.
GCI (Global Control Information) update
• If channels are updated after subscription, updating starts automatically. "UPDATING" flashes and no sound can be
heard.
• Update takes afew minutes to complete.
• During update, you cannot operate your Satellite Radio.
1
Activate your XM subscription after
connection
• Only Channel 0, 1, and 247 are available before
activation.
~_=.::::::::::::J
XM Tuner* starts updating all the XM channels.
"Channell" is tuned in automatically.
2
Check your XM Satellite Radio
10
labelled
on the casing of the XM Tuner, or tune in to
"Channel 0" (see page 20).
3
Contact XM Satellite Radio on the internet
at <http://xmradio.com/activation/> to
activate your subscription, or you can call
1-800-XM-RAOIO (1-800-967-2346).
Once completed, the unit tunes in to one of the
available channels (Channel 4or higher).
1
~~~~.=.:::::::::::
SIRIUS Satellite Radio starts updating all the SIRIUS
channels.
Once completed, SIRIUS Satellite Radio tunes in to
the preset channel, CH184.
2
Check your SIRIUS
10
(see page 28).
3
Contact SIRIUS on the internet at
<http://activate.siriusradio.com/> to
activate your subscription, or you can call
SIRIUS toll-free at 1-888-S39-SIRIUS (7474).
"SUB UPDT PRESS ANY KEY" scrolls on the display
once subscription has been completed.
Activate your SIRIUS subscription after
connection
*
XM Tuner: XMOirect
™
Tuner Box or XMDirect2 Tuner
System
EXTERNAL DEVICES
Continued on the nextpage
19