Advanced Speaker Connection; Bi-Amping - Onkyo TX-NR636 Advanced Manual

Advanced Speaker Connection

Bi-Amping

It is possible to connect speakers supporting bi-amping to
improve quality of the low and high pitched ranges. Up to
5.1 ch will be played in bi-amping.
„ Connections
„
1. Connect as below using the FRONT terminals and
BACK or HEIGHT terminals.
Tweeter
(high pitched tone)
Subwoofer
(low pitched tone)
Front R
2.
Turn the unit on and set "Speaker Setup" to "Bi-Amp".
After pressing RCV, press HOME on the remote
1
controller.
With the cursors, select "Setup", and then press
2
ENTER.
With the cursors, select the order of "2.Speaker
3
Setup" – "Speaker Settings" – "Front Speakers Type".
Select "Bi-Amp" with the cursors and press ENTER.
4
• Before bi-amping, be sure to remove the short-
circuit connector that connects the tweeter (high
pitched tone) terminal and the subwoofer (low
pitched tone) terminal.
• Use speakers supporting bi-amping only. For
details, refer to the speakers' instruction manual.
Front L
Advanced Speaker Connection
45