Ipod Audio Bluetooth Mode - Clarion NX606AU Owner's Manual

• Touch [ ] button to starts playback from the
beginning of the next track.
• Touch [ ] button to starts playback from the
beginning of the current track; when this button is
touched again within about 5 seconds, playback
starts from the beginning of previous track.
beginning of the current track.
Fast Forward/Fast Backward
Touch [ ] or [ ] button and hold more than 2
seconds to start fast backward or fast forward during
playback. Release the button will continue playback
with normal speed.
Note:
*The fast forward and fast backward speed may differ
depending on the video files.
Repeat Playback
* The repeat set as the factory default is Repeat Off.
Touch the [ ] button once for Repeat One, again
for Repeat All, again for Repeat Off.
Note:
The operation in iPod video mode is as same as iPod
Audio mode. Please refer to the iPod Audio Mode
operation.
Note:
Video playback is not available on all iPod/iPhone
devices. Please contact your Clarion dealer for details.
An optional connection cable or accessory may be
required for this feature.
Note:
• Video is not displayed when the automobile is moving.
• Image data may not be played back according to the
status of the iPod/iPhone.
• The volume setting of video data is relatively lower than
audio data. Be sure to lower the volume setting before
switching to the other mode.
• Do not select the categories with no track registered
from the iPod menu screen. The iPod/iPhone may be
frozen. If the iPod/iPhone is frozen, reset the iPod/
iPhone by following the procedure described in the
instruction manual of the iPod/iPhone.
• Audio may be played back slightly out of
synchronization with video images.
NX606AU
32

iPod Audio Bluetooth Mode

When your iPod/iPhone is connected via Bluetooth
to this unit, you can also enter iPod Audio mode. The
operation is same as the normal iPod Audio mode.