Planning A Multipoint Route - Clarion NX606AU Owner's Manual

5. The route is calculated and the map appears showing the entire route, where you can check
route information and route alternatives. Tap

3.1.9 Planning a Multipoint Route

To build your route destination-by-destination, perform the following steps:
1. Tap on the Navigation view to access the Navigation menu.
2. Tap .
3. There is only one line in the list of route points, the starting point of the route, which is normally
the current GPS position.
4. Tap
5. The New Route to... screen appears, where you can select the destination of the route the
same way as described in the previous sections.
NX606AU
44 English
to start your journey.
to select the destination.
to modify the route parameters, or tap