Selecting A Location On The Map - Clarion NX606AU Owner's Manual

5. Check the settings for road types and change them if necessary.
6. Tap
map or tap to select a different destination.
7. The route is calculated and the map appears showing the entire route, where you can check
route information and route alternatives. Tap

3.1.8 Selecting a location on the map

To select a map location, perform the following steps:
1. Locate your destination on the map. Move and scale the map as necessary.
2. Tap the location that you want to select as your destination. The cursor (
3. (optional) If needed, tap
Tip!
If you already have a planned route, tap
selected location to your route.
4. Tap
to confirm the destination. You can also select a nearby point on the
to start your journey.
to list the Places near the selected point or to save this location.
to select the cursor as the destination.
to modify the route parameters, or tap
and
NX606AU
) appears there.
to add the
English 43