Ecofeedback Consumption Indicator - Miele G 6990 Operating Instructions Manual

EcoFeedback consumption in‐
dicator
The
Consumption
calling up information about the energy
and water consumption of your dish‐
washer (see "Settings menu - Con‐
sumption").
Three different types of information can
be displayed:
– an estimate of the consumption be‐
fore the programme begins
– the actual consumption at the end of
the programme
– the total consumption of the dish‐
washer
1. Consumption estimate:
The estimated energy and water con‐
sumption for a programme can be
shown in the display.
 Open the door.
 Select the programme you want.
 Select the
Estimated consumption
tion.
The estimated energy and water con‐
sumption will appear in the display.
The estimated consumption levels will
be displayed as a bar chart. The more
bars (  ) in the display, the more ener‐
gy or water will be used.
The values are influenced by the pro‐
gramme selected and any programme
options selected.
The consumption indicator is switched
on as standard. However, you can also
switch the indicator off (see "Settings
menu - Consumption").
function is used for
Caring for the environment
2. Actual consumption
At the end of the programme you can
call up the actual amount of energy and
water used by the programme which
has just been run.
 Open the door at the end of the pro‐
gramme.
 Press the  sensor.
Switching the dishwasher off at the
end of the programme will delete the
actual consumption values for the
programme which has just been run.
3. "Consumption" setting
The
Consumption
the energy and water which has been
used in all previous dishwasher pro‐
grammes (see "Settings menu - Con‐
sumption").
op‐
setting gives a total of
19