Table of Contents
Advertisement
Under ready condition, press this key once, it will clear all the operation.
Under running situation, press "clear" key, all the figures will be kept to "0" except for speed.
（6）"incline short cut key"
Press this key, the incline goes directly to the chosen height.
（7）"speed down"
Under running condition, press this key, speed can be speeded down to the one you need.
（8）"speed up"
Under running condition, press this key, speed can be speeded up to the one you need.
（9） "music"
Press this key to open or shut the speaker amplify.
（10）"Mode"
Under ready condition, press this key to choose running program。 There are P1-P48， 48 programs in
total. The first 24 programs are without incline and the last 24 programs are with incline.
（11）"speed short cut key"
Under running condition, press this key, speed can be set to the value directly.
（12）"on/off"
Under ready condition, press this key, it runs at the speed of 1.0km/h. Under running condition, if
it runs at speed more than 3.5km/h, it will slow down then stop. During this stopping process, other keys
are not available. If it runs at speed less than 3km/h, then it stops immediately.
（13）"safety key"
Under urgent condition, pull this key, machine stops immediately.
5.2 Unload operating
1. Insert power plug into the socket with earth wire, turn the switch to "1" position which is on the
frame
2. Put the safe key in the right position, then circuit is on, press "on/off", keep it run in unload condition.
Test the condition of running belt (testing from low speed to high ones), after testing, press "on/off".
3. If everything is ok, then start to run.
5.3 Meter operating instruction
5.3.1
1. Insert power plug into the socket with earth wire, turn the switch to "1" position which is on the
frame. Place the safe key to the appointed position. After a few seconds, panel will show that the
machine is ready.
2. Nip another end of safe key to your clothes, and stand on the footplate on both sides.
3. Press "on/off" key, running belt moves at the lowest speed (1.0km/h). Speed windows will display
your running speed.
4. Start to run.
5 . Press speed key or incline key to adjust speed and incline, speed window and incline window will
display your speed and incline .
6. To end your exercise in a safe way, please first press "on/off" key to close the treadmill. Please leave
the running belt until it stops slowly. Turn off the power.
5.3.2 Heart Rate Testing
Our treadmill can test your heart rate via the heart rate sensor. The data is only for reference.
5.4 Folding and Opening Treadmill
5.4.1 Folding
- 5 -
Advertisement
Table of Contents
