Table of Contents
Advertisement
USB cable connection
Insert a USB cable into the unit, and fix with a lock screw.
iPod Connection (sold separately)
USB connection
Connect USB cable to an iPod with iPod Dock interface cable.
USB cable
L_'-_-""""4i~~U~
iPod Dock interface Cable
Full Speed™ connection
Connect Full Speed™ connector to an iPod with FULL SPEED
™
connection cable (KCE-422i).
IiJ
FULL SPEEDTM
t3J)
Connection
cab~
(KCE-422i) (Sold separately)
Remove the iPod
Remove the iPod from FULL SPEEDTM Connection Cable or iPod
Dock interface cable.
• II' USB is connected. atier the unit has been changed
to
a source
other than the iPod, remove the iPod. If the iPod is removed in the
iPod mode, data may cause dl/mage.
• If sound is not output or the iPod is not recognized even when the
iPod is connected. remove the iPod once. then connect it again. or
reset the iPod.
• Before connecting the iPod to this unit. set the EQji/llction of iPod to
OFF.
42-EN
USB memory Connection (sold separately)
Connect USB memory
Connect USB memory to USB cable.
USB cable
~~
USB memory
Remove USB memory
Pull out USB memory squarely from the USB cable.
USB cable
..
(~,t===~ ! ,
I
USB memory
• When removing USB memory, pull it out straight.
• Ifsound is not output or USB memory is not recognized e\'en when
USB memory is connected. remove USB mel/wry once. then connect
it again.
• Change
to
a source other than the USB memory mode. then remove
the USB memory.lfthe USB memory is removed in the USB memory
mode. data may be damaged.
Portable Audio Player Connection (sold separately)
Connect Portable audio player
Connect the cable supplied with a Portable audio player to
the USB cable.
D
USB"."
~ ~
Supplied cable for the Portable audio player
Remove Portable audio player
Disconnect the Portable audio player from the supplied
player cable.
• Refer also
to
the Owner's Manual of the Portable audio player.
Advertisement
Table of Contents
