Switch
Circuit Breaker
Extension Table
UNPACKING (FIGURE 1)
IMPORTANT: Remove protective paper from the table before operating
the unit.
The planer comes assembled as one unit. Additional parts which need to be
fastened to planer should be located and accounted for before assembling.
A Dust Chute
B Thumb Screw (2)
C T-handle Hex Wrench (on planer)
D Plug
E Magnet (2, on planer)
F Depth adjusting handle
G Bolt with Lock Washer
WARNING: Do not attempt assembly if parts are missing. Use
this manual to order replacement parts.
KNOW YOUR PLANER
ASSEMBLY AND ADJUSTMENTS
Depth Adjusting Handle
Carrying Handle
Figure 1
7