Hyundai 2016 Tucson Owner's Manual page 132

Convenient features of your vehicle
6. Firmly press and release the
"learn" or "smart" button. (The
name and color of the button vary
by manufacturer). There are 30
seconds to initiate step 7.
7. Return to the vehicle and firmly
press, hold for 2 seconds and
release the programmed
HomeLink ® button. Repeat the
"press/hold/release" sequence a
second time, and, depending on the
brand of the garage door opener (or
other rolling code equipped device),
repeat this sequence a third time to
complete the programming
process.
® should now activate your
HomeLink
rolling code equipped device.
3-34
Gate operator & Canadian program-
ming
During programming, your handheld
transmitter may automatically stop
transmitting. Continue to press the
Integrated HomeLink ®
Control System button (note steps 2
through 3 in the Programming portion
of this document) while you press
and re-press ("cycle") your handheld
transmitter every two seconds until
the frequency signal has been
learned. The indicator light will flash
slowly and then rapidly after several
seconds upon successful training.
Operating HomeLink
To operate, simply press and release
the programmed HomeLink
Activation will now occur for the
trained device (i.e. garage door
Wireless opener, gate operator, security sys-
tem, entry door lock, home/office
lighting, etc.). For convenience, the
hand-held transmitter of the device
may also be used at any time.
Reprogramming a single HomeLink
button
To program a device to HomeLink
using a HomeLink
trained, follow these steps:
1.Press and
HomeLink ®
release the button.
2.The indicator light will begin to flash
after 20 seconds. Without releasing
the HomeLink
with "Programming" step 2.
For questions or comments, contact
HomeLink ® at www.homelink.com or
1-800-355-3515.
®
® button.
®
®
® button previously
hold the desired
button. DO NOT
®
button, proceed