Tuning Tv Stations - Sanyo VHR-VK910A User Manual

Tuning in TV stations
ACMS (Automatic Channel Memory System) automatically tunes and stores TV channels. If you want to return to ACMS after
your initial set up, access it via the menu.
Using ACMS
1 Turn on your television and your
Video and select the video
channel on your television.
2 Press to access the main
menu. Press 1 or 2 to select
ACMS, and then OK.
D
ACMS
Pr-12
OK i
ACMS
3 Press OK to start the automatic
tuning process.
4 When the ACMS has finished a
screen showing all the channels
that have been found and the
positions they have been placed in
will be displayed.
5 Check that the channels
correspond to the positions in
which you want them. If they are
not in the order that you would like
they can be moved or deleted.
See Changing the order of the
television stations and Deleting
the television stations.
6 Press to store the settings.
Changing the order of
the television stations
You will find it useful to have a
current television programme guide
to hand during this operation.
1 Press to access the main
menu. Use 1 or 2 to select PR
SET then press OK.
2 Press again.
3 Use either the 3 or 4 buttons to
select the programme number that
you wish to move. Then press 2.
4 Press 3 or 4 until you reach the
position you wish to store the
channel in.
5 Press OK. The programme will
move to the new position.
6 Press to leave the menu.
To move other programs repeat the
above process.
Deleting the television
stations
1 Press to access the main
menu.
2 Use 1 or 2 to select PR SET
then press OK.
3 Press then use 3 or 4 to
select the programme number you
wish to delete.
4 Press 1, after a short while the
selected station will be deleted.
The remaining stations are
resorted automatically.
5 Press to remove the menu.
If you wish to delete further
stations repeat the above process.
5