Introducing Your Video And Remote Control - Sanyo VHR-VK910A User Manual

Introducing your Video and Remote Control
Most of your Video's functions are accessed using the Remote Control. A summary of the functions of the main
buttons are shown below (right), other buttons are described elsewhere in this guide.
Basic functions of your Video can also be operated using the control panel on the front of your Video.
To turn the Video on.
After turning on, the Video can be
operated by the Remote Control
To stop or
eject the tape
STOP EJECT
-
CHANNEL
VIDEO IN L-AUDIO IN-R
AV2
Select the
channel you
want to watch.
Audio IN
Video IN
Tape Compartment
+
Remote
Display
Control
Panel
Sensor
VHR-VK910A/NZ Only : Video IN and Audio IN sockets are
for connecting devices such as Video Cameras, Games
Consoles and other Video. You will need to connect to
them using an Audio Video cable.
To Pause a tape or
view it frame by frame
To play a tape
To rewind a tape
To fast
forward
a tape
recording another.
REW FF
P/STILL REC/ITR PLAY To pause and view
To record the programme
you are watching
through the menus,
Select the channel
you want to watch
Don't forget to install three AAA type batteries in the Remote Control.
To select the input
source for recording
POWER
To watch one TV
TV/VCR TV/VCR AV AV
channel whilst
1 2
4 5
7 8
frame by frame
To display the on
screen menu
Use the 3/4/1/2
buttons to move
after accessing
them via the
button.
(3/4).
Press OK to
approve a menu
item or show the
clock or counter.
V Feature is not available
3
EJECT
To fast forward picture
CM SKIP CM SKIP
search by 30 secs.
ez POWER OFF ez POWER OFF
3
See page 12
ez REPEAT ez REPEAT
6
9 0
To select the
recording speed
of the tape
To record programme
being watched
To reset the tape
counter to zero
PROG. PROG.
C.LOCK C.LOCK
To switch the child
lock on and off