Panasonic KV-S1045C Installation Manual page 12

Installation
Note
•
It is highly recommended to keep the
original carton and all packing materials.
They are necessary when repacking.
•
[For United States only]
Applicable limited warranty information is
included on the Drivers & Utilities / Manuals
CD-ROM.
•
Two power cords may be included. Use the
power cord appropriate for where you use
the unit.
2.
Remove all packing tape.
3.
Uninstall the mixed batch card guide (A).
•
With the mixed batch card guide, you do not
have to adjust the document guides to fit the
width of the card. It also prevents a card from
skewing when scanning paper documents and
a card simultaneously.
•
It is pre-installed and fixed to the scanner with
adhesive tape.
•
When not using the mixed batch card guide,
uninstall it as shown in the illustration below,
and keep it on the back side of the feed tray
(B) for future use.
•
When using the mixed batch card guide, install
it in the reverse order of uninstallation.
For details on the mixed batch card guide, refer
to the Operating Manual.
4.
Set the feed tray.
Before using the scanner, follow the steps below to
set the feed tray.
12 Installation Manual
A
B
a.
Insert the feed tray (A) into the scanner as
shown in the illustration below.
b.
Push the right (A) and left (B) sides of the feed
tray in that order until the feed tray locks in
place.
c.
Pull out the feed extension tray in the direction
of the arrow shown in the illustration below.
A
A
B