Permobil M300 Corpus 3G Manual page 16

M300 Corpus 3G
Alternative Drive Systems
TOTAL CONTROL HEAD ARRAY SYSTEM:
Part Number Description

I10981
SIP & PUFF SYSTEMS:
Part Number Description

I10573

I10574

I10762
ALTERNATIVE PROPORTIONAL CONTROL SYSTEMS:
Part Number Description

I10763

I10764

I10765

I10317

I10767

I10766

I10638

I10770
Alt Drive Systems Setup
CHOOSE OMNI OR INPUT MODULE (REQUIRED):
Part Number Description

ID51154IR

I10577

I10581
CHOOSE MOUNTING POSITION OF SEAT CONTROL SWITCHBOX:
Part Number Description

I10080
Rev 2013-4 11/4/2013
Add Right Lateral Arm w Pad (No Sensor or Switch)
Choose Lateral Arm Adjustment Range and Attachment Position:
Short (5.5" - 8"): ______
Upper Attachment: ______
Sip & Puff System for Omni
Requires Omni Control Module. Cannot use this part with an Input Module. Includes breath
tube kit.
Sip & Puff System with Fiber Optic Opti-Stop
Requires Omni Control Module. Cannot use this part with an Input Module. Includes breath
tube kit.
Adjustable Mounting Hrdw - Sip & Puff
Required when selecting PN I10573 or I10574.
VIC Proportional Finger Control for Omni / IOM
The VIC CCD translates small finger movements into proportional driving commands.
VIC Adjustable Mount Kit - Armrest
Mount in front of Left Arm: _____
VIC Adjustable Mount Kit - Midline
Mount on Left Arm: _____
Proportional Tablet Control for Omni / IOM
The Tablet Control is a unique drive input which enables a user to control a power wheelchair
in a very similar manner to a mouse being controlled by a touchpad on a laptop computer.
The dimensions of the Tablet Control Pad are: 30cm Wide x 24cm Long x 4cm Thick Kit also
includes: Buddy Button Switch, and Tablet Control Mounting Bracket.
Proportional Foot Control
Mount on Left: _____
Adjustable Mounting Hrdw - Foot Control
Required when selecting PN I10767.
RIM Control - SwitchIT for Omni
Requires Omni Control Module. Cannot use this part with an Input Module.
Adjustable/Removable Hardware - RIM Control
Required when selecting PN I10638.
Omni Control Module for R-net w/ Infrared
Mount in front of Left Arm: _____
which type of alternative drive input you will be using if not ordering the input device from
Permobil. Input Device: ___________________________
Adjustable Swing-Away Hardware - Omni
Required when selecting Part Number ID51154IR.
Input Module (IOM) for R-net Control System
This device allows a proportional or switched drive input to be connected to an R-net Control
System without the use of an Omni. It must be ordered in conjunction with an R-net Remote
Joystick. It does NOT support any of the following input devices: Sip-n-Puff, 3-Switch Head
Array or RIM control.
Mount Seat Control Switchbox on Backrest
Long (9" - 13.5"): ______
Lower Attachment: ______
Mount in front of Right Arm: _____
Mount on Right Arm: _____
Mount on Right: _____
Mount in front of Right Arm: _____
Page 16 of 18
CANADIAN MSRP PRICE LIST
MSRP - CA ADP Code $408.00
408.00
MSRP - CA ADP Code $1,549.38
1,549.38 WEX5 WEX5
2,062.44 WEX5 WEX5
240.72
MSRP - CA ADP Code $2,750.94
2,750.94
240.72
760.92
4,825.62
2,720.34
240.72
5,121.42
240.72
MSRP - CA ADP Code $2,159.34
2,159.34
Please specify
115.26
1,523.88
MSRP - CA ADP Code
No Charge