EC Declaration of Conformity Intended use The tool is intended for planing wood. Makita Corporation responsible ENG104-2 manufacturer declare that the following Makita Noise machine(s): The typical A-weighted noise level determined according Designation of Machine: to EN60745: Cordless Power Planer...
(GFCI) protected supply. Use of an Tomoyasu Kato GFCI reduces the risk of electric shock. Director Personal safety Makita Corporation 10. Stay alert, watch what you are doing and use 3-11-8, Sumiyoshi-cho, common sense when operating a power tool. Anjo, Aichi, JAPAN...
27. Under abusive conditions, liquid may be 16. Use only Makita blades specified in this ejected from the battery; avoid contact. If manual. contact accidentally occurs, flush with water. If 17.
injury. Charge the battery cartridge with room ENC004-2 temperature at 10 C - 40 C (50 F - 104 F). Let a hot battery cartridge cool down before IMPORTANT SAFETY charging it. INSTRUCTIONS Charge the Nickel Metal Hydride battery cartridge when you do not use it for more than FOR BATTERY CARTRIDGE six months.
2. Installation bolts rags to protect your fingers or hands when removing or installing the blades. Use only the Makita wrench provided to remove or • install the blades. Failure to do so may result in overtightening or insufficient tightening of the installation bolts.
NOTE: downhill. If you connect a Makita vacuum cleaner to this tool, • The speed and depth of cut determine the kind of finish. more efficient and cleaner operations can be The power planer keeps cutting at a speed that will not performed.