Honeywell LYNX Touch L5210 Series User Manual page 55

Manually Configure Access Point
Ready To Arm
Users Events
Date Time Reminders
Ready To Arm
Scan Access Points
Manual Configure AP
WPS
Press the WPS button on the access point, then press this WPS button.
Automatic Video Recovery
Ready To Arm
Name SSID
Toms_net
Security Network Type
WPA1
Infrastructure
Key
* * * *
Join
Test Keypad
Slide Show WiFi Config
Back
5200-100-036-V0
5200-100-073-V1
5200-100-075-V0
1. At the Master User screen select the WiFi Config icon. The
system displays the WiFi options screen.
2. Select the "Manually Configure AP" button to view the
available networks. The WiFi enrollment screen is displayed.
3. Select the "SSID Name" button and enter Network name on
the displayed keypad.
4. Select the "Security" button and select from "Open", "WPA1,
"WPA2" and "WEP". The network information is displayed. If
a password is required, select the "Key" button and enter the
password.
Note: When configuring for WEP encryption key on the access point,
always use hexa-decimal type as the input method on the panel.
The input key should contain characters such as 0-9 and A-F.
5. Select the "Join" button. A confirmation screen will be
displayed. Select "OK", then select "Save" to confirm the
selection.
6. Select the "2" button as required to return to the Master User
screen.
² ²
86(5 )81&7,216 86(5 )81&7,216 86(5 )81&7,216 86(5 )81&7,216
:L)L &RQILJXUDWLRQ