Table of Contents
Advertisement
The display will indicate:
for hour and minutes
for the day of the week
(1=Mon, ..., 7=Sun)
for day and month
for the year
for the format
Fig. 2.6
To exit programming, hold down key 19 for
5 seconds (all changes will be saved) or
wait 60 seconds.
NOTE: If a remote is connected, the card
acquires the time, date and year data from
the remote itself, and synchronises with it
(ID 20).
C.h. / D.h.w. functioning
• Press the key 14 for 2 seconds until both
and
symbols appear on the
display Fig. 2.7.
11
12
13
14 15
Fig. 2.7
The LCD display displays the boiler tem-
perature (primary circuit) and the
; symbols; the
flashes Fig. 2.8.
INSTRUCTIONS FOR USE
19
18
17
16
and
symbol slowly
Fig. 2.8
Hot water production functioning only
• Press the key 14 for 2 seconds until the
symbol appears on the display Fig.
2.9.
11
12
13
14 15
Fig. 2.9
The LCD display displays the boiler temper-
ature (primary circuit) and the
the
symbol slowly flashes Fig. 2.10.
Fig. 2.10
2.4
C.h. circuit temperature
The output temperature of c.h. water can be
adjusted by acting on keys 17 (reduce) and
18 (increase) (Fig. 2.9) from a minimum of
about 25°C to a maximum of about 85°C.
Press one of the two keys once to display
the "set" value. Press again to access the
modification.
19
18
17
16
symbol;
- 15 -
Advertisement
Table of Contents
