Hints And Tips; Fault Code - Kenwood KID60B12 Installation Instructions Manual

hints and tips

• Repairs should only be carried out by a qualified technician in strict accordance with
current local and national safety regulations. Unauthorised or incorrect repairs could
cause personal injury or damage to the unit.
• Before calling for service, please refer to Hints and Tips to solve some general problems
by yourself.

fault code

codes possible causes
F1 Alarm is active against water
overflow
F2 The waste water in the machine
cannot be discharged
F3 Error of continuous water input
F5 Inadequate water supply
F6 Faulty heater sensor
F7 Overheating error (temperature
in the machine is too high)
F8 Heater error
F9 Divisor position error
FE Faulty electronic card
• Power off your machine and close the tap.
• Contact the service.
• Water discharge hose is clogged.
• The filters of your machine might be clogged.
• Power off-on your machine and activate the program
cancellation command.
• If the error continues, contact the service.
• Close the tap.
• Contact the service.
• Make sure the water input tap is totally open and
that there is no water cut.
• Close the water input tap, separate the water
input hose from the tap and clean the filter at the
connection end of the hose.
• Restart your machine, contact the service if the error
resumes.
• Contact the service.
• Contact the service.
• Contact the service.
• Contact the service.
• Contact the service.
remedy
31