Chevrolet Beat Petrol Owner's Manual page 90

86 Climate Control
Fan speed
Adjust the air flow by switching the fan
to the desired speed.
Demisting windshield
1. Set the recirculation mode to
outside air mode and turn the air
distribution knob to DEFROST
2. Switch on cooling .
3. Select desired temperature.
4. Adjust the fan control knob to
desired speed.
5. Turn the temperature control knob
to the red area for warm air.
A temperature difference between the
outside air and the windshield can
make the windshield mist up and
reduce your forward vision.
Do not use the floor/defrosting mode
( ) or the defrosting (
extremely humid weather when the
temperature control is set to blue area.
1 2 3
Otherwise accidents can result,
0
4
leading to vehicle damage and
personal injury.
Air Recirculation System
.
The air recirculation mode is operated
with the
Caution
) mode in
lever.
Selects either outside air or recirculated
inside air.
Warning
Driving with recirculation mode for
prolonged period of time can make
you sleepy. Periodically turn to the
outside air mode for fresh air.
The exchange of fresh air is reduced in
air recirculation mode. In operation
without cooling the air humidity
increases, so the windows may mist
up. The quality of the passenger
compartment air deteriorates, which
may cause the vehicle occupants to
feel drowsy.
Heating
Normal heating
1. Turn temperature control knob to
red area for heating.
2. Turn air distribution knob to face or
bi-level mode.
3. Turn fan control knob to desired
speed.