Chevrolet Beat Petrol Owner's Manual page 123

4. Rotate bulb holder anti-clockwise. 5. Remove bulb holder. Push bulb into
socket slightly, rotate anticlockwise,
remove and renew bulb.
6. Insert bulb holder into the tail light
assembly and screw into place.
Connect wiring plug. Install tail
light assembly in body and tighten
screws. Close covers and engage.
7. Switch on ignition, operate and
check all lights.
Vehicle Care
Side Turn Signal Lamps
1. Push light towards the back of the
vehicle and remove.
2. Rotate bulb holder anti-clockwise.
3. Pull bulb out of the bulb holder and
renew.
4. Reinstall in reverse order.
119