GMC 2008 Chevrolet Tahoe Supplemental Owner's Manual page 76

14. Wrap the air only hose (F) around the side of the
air compressor channel to stow it back into place
in its original location.
15. Stow the air compressor accessory plug (C) back in
the air compressor. To do this, wrap the air
compressor accessory plug, snap in the plug, and
then push in the bottom and then the top of the
wrapped air compressor accessory plug.
CAUTION:
{
Storing the tire sealant and compressor kit or
other equipment in the passenger
compartment of the vehicle could cause injury.
In a sudden stop or collision, loose equipment
could strike someone. Store the tire sealant
and compressor kit in its original location.
16. Return the equipment to its original storage location
of your vehicle.
5-40
Removal and Installation of the Sealant
Canister
To remove the sealant canister:
1. Unlock the air compressor inflating hose from the
sealant canister by pulling up on the lever.
2. Pull the air only hose from the sealant canister.
3. Unwrap the sealant/air hose from the compressor.