Move Eye"Control Operation - Mitsubishi Electric R410A Operating And Installation Instructions

Split-type
Hide thumbs Also See for R410A:
Table of Contents

Advertisement

MOVE EYE CONTROL OPERATION...Sensible temperature
The proceed of the unit's temperature control is a gerneral temperature control proceed, that accord to the temperature of wall,
floor and room measured by MOVE EYE sensors (MOVE EYE control operation).
When cancel MOVE EYE control, the gerneral temperature control proceed will instead.
Starting MOVE EYE control
MOVE EYE control operation is activated when MOVE EYE button is pressed with a thin stick in manual COOL or manual HEAT mode.
Note:
MOVE EYE control operation is activated when the remote controller is first used following replacement of the batteries or resetting of the remote
controller.
Cancelling MOVE EYE control
MOVE EYE control operation is canceelled when MOVE EYE button is pressed with a thin stick once again.
Note:
If the conditioner is turned OFF without cancelling MOVE EYE control operation, MOVE EYE control operation is activated the next time the air
conditioner is turned ON.
MOVE EYE control operation
The sensors constantly measure the room and floor/wall tempera-
tures to automatically adjust to the set temperature by estimating
the temperature actually perceived by a person inside the room
("sensible temperature").
"sensible temperature").
sensible temperature"). "). ).
Advantages:
The air inside the room is conditioned quickly to a comfortable
condition.
The room will not become too cold or hot even when the air
conditioner is kept on for a long period.
MOVE EYE sensor
When AREA setting is not activated, the sensing range of MOVE EYE Sensor differs depending on the installation location of the air-conditioner.
Installation
Installation at left Installation at center Installation at right
opsition
Image of sensing
range
Driection of sensor
Left
Refer to the description for slide switch setting. (Page 30)
Install the front panel correctly after being removed for maintenance or service so that the floor/wall temperatures can be measured correctly.
Approx 20%
Approx 30%
Center
Right
34
Wall
temperature
Humidity
Floor
temperature
Approx 50%
Wall/floor temperature
Room/air temperature
Approx 150 degrees
Room
temperature
Sensible
temperature
Advantages of i-see

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents