Centurion PoloPhone Installation Manual page 9

8 8 8
Screw the base firmly into position and
using the slots provided in the
mounting holes, adjust the base to be
perfectly vertical.
10
Terminate cable onto electronics.
Refer to wiring diagram (See page
10).
13
Clip outer cover back into position.
NB: It will be necessary when
commissioning the unit to have
the cover removed.
B B B
(B) Ensure that sealing washer is fitted
and closes off the mounting hole
against water ingress.
11
If the cable is surface mounted, route
the cable into the unit from
underneath as shown and terminate
onto the electronics. Refer to the
wiring diagram (See page 10).
14
Secure the cover using the fixing
screw provided in kit.
ENTRY PANEL INSTALLATION
9
Hook the electronics module into the
base as shown and clip back into
position.
12
Write call button labels, insert into
lens(es) and clip lens(es) back onto
chassis.
Polophone Intercom - Page 9