Bosch Vision 500 series Operating, Care And Installation Instructions Manual page 25

Washing
Turn on the water faucets.
q
Turn the program selector to the
q
desired program.
Load the washing machine and
q
close the door.
The Start/Pause indicator light
flashes (red).
If necessary, press the button(s) for
q
additional option(s).
The indicator light of the selected
button is lit (red).
i If an incorrect combination was
inadvertently selected, the
indicator light of the selected
button is turned off.
If necessary, change the spin
q
speed with the Spin selection
button until the the desired spin
speed indicator light is lit.
If necessary, change the Start
q
time. Press the Delay Start button
until the desired Start time is
displayed.
Press the Start/Pause button.
q
The indicator light is lit (red).
Display shows the run time of the
selected program. The program
starts.
i
Each program step is indicated by
the indicator lights under the
display.
25