Westerbeke 6.5 SBCG-60HZ Service Manual page 47

4
CYUNDER HEAD
TORQUE 43 - 51 FT-L/3$
60-70Nm
9¥ftlE
1QVALVE
REMOVING THE CRINDER HEAD
FROM THE CRINDER BLOCK
CYLINDER HEAD AND VALVES
Disassemble the cover bolts as shown above, taking care not
to lose the washer and insert. Remove the rocker cover and
rocker cover gasket.
Loosen each of the cylinder head bolts, a little at a time so
as to avoid the possibility of distorting the cylinder. Repeat
several times until the bolts are unfastened. Follow the
sequence shown in the diagram.
Remove the cylinder head and the cylinder head gasket.
Engines & Generators
- 36
NUMBERS INDICATE THE
SUGGESTED ORDER OF
DISASSEMBLY
5 7
8 6
CYLINDER HEAD BOLTS
LOOSENIN~
SEQUENCE