Table of Contents
Advertisement
DISASSEMBLY OF "LOW CO" COMPONENTS
TO FUEL COOLER (UPPER)
TO FUEL PUMP (BOTTOM)
FUEL CELL
DISASSEMBLY
(cont.)
Remove the lower field fuel cooler, the fuel cell, and the
bracket they are mounted on. Unplug the wiring connection
at the fuel injector and disconnect the fuel hose.
The bracket assembly can now be removed from the engine'
block.
Set all these components aside and cover them over to
protect them.
REMOVE BRACKET ASSEMBLY
COMPONENT MAINTENANCE
Fuel coolers should be cleaned in a mild muriatic acid bath
and pressure tested to 50 psi.
No air bubbles should occur when submerged in water for
30 seconds with the inside of the cooler shell being
pressurized
to
50 psi.
The fuel regulator should be changed.
All the fuel filters should be changed and replaced.
Inspect carefully all the hoses and replace as needed.
Engines & Generators
34
Advertisement
Table of Contents
