Installing The Larder; Levelling The Larder; Cleaning Before Use; Before Using Your Larder - Currys Essentials CIL55W10 Instruction Manual

Installing the Larder

Please refer to Installation Guide.

Levelling the Larder

To do this use the two levelling feet at the front of the
larder.
If the larder is not level, the door and magnetic seal
alignments will not be covered properly.

Cleaning Before Use

Wipe the inside of the larder with a weak solution of bicarbonate soda. Then rinse with warm water using a
'wrung-out' sponge or cloth. Wash the baskets and shelves in warm soapy water and dry completely before
replacing in the larder. Clean the exterior of the larder with a damp cloth.
If you require more information refer to the CLEANING section.
• Before Plugging in YOU MUST
Check that you have a socket which is compatible with the plug supplied with the larder.
• Before Turning On!
Do not turn on until two hours after moving the larder. The coolant fluid needs time to
settle.

Before Using Your Larder

Before placing any food in your larder, turn it on and wait for 24 hours, to make sure it is working properly
and to allow the larder to fall to the correct temperature. Your larder should not be overfilled.
GB-6
Currys Essentials CIL55W10_1000311.indd 6 11/03/2010 8:58 AM