Maintenance; Changing The Internal Light; Care When Handling / Moving Your Larder; Servicing - Currys Essentials CIL55W10 Instruction Manual

Maintenance

Changing the Internal Light

1. Before carrying out the bulb replacement always press and turn the thermostat control dial to Position
0, then disconnect the mains supply.
2. Hold and unscrew the light bulb cover.
3. Remove the plastic light bulb cover.
4. Remove the old bulb by unscrewing in an anticlockwise direction.
5. Replace with a new bulb (10W SES). Please make sure that it is secure in the
bulb cover.
6. Refit the translucent light cover and reconnect your larder to the mains
supply and switch on.

Care When Handling / Moving Your Larder

Hold the larder around its sides or base when moving it. Under no circumstances should it be lifted by
holding the edges of the top surface.

Servicing

This larder should be serviced by an authorised engineer and only genuine spare parts should be
used. Under no circumstances should you attempt to repair the larder yourself. Repairs carried out by
inexperienced persons may cause injury or serious malfunction. Contact a qualified technician.
When the larder is not in use for a long period of time, disconnect it from the mains supply, empty all food
and clean the appliance, leaving the door ajar to prevent unpleasant smells.

Disposal

Old appliances still have some residual value. An environmentally friendly method of disposal will ensure
that valuable raw materials can be recovered and used again. The refrigerant used in your appliance and
insulation materials require special disposal procedures. Ensure that none of the pipes on the back of the
appliance are damaged prior to disposal.
Up to date information concerning options of disposing of your old appliance and packaging from the new
one can be obtained from your local council office.
When disposing of an old appliance break off any old locks or latches as a safeguard.
GB-10
Currys Essentials CIL55W10_1000311.indd 10 11/03/2010 8:58 AM