Note: Board ground wires may have to be disconnected to disassemble some boards. All ground wires must be
reconnected using jumper leads if necessary before power is applied to Receiver for service.
Ornament Panel
1. The Ornament Panel is secured by (3) striker pins.
Grip the Ornament Panel at the side corner pull to
remove.
Ornament Panel
Cabinet ( Top )
1. Remove (11) Screws
Top Cabinet
(11) Screws
(11) Screws
- 6 -
Speaker Grille
1. Remove (2) screws.
Speaker Grille
Speaker Ass's
1. Remove (10) screws.
(2) Screws
(10) Screws