LG LPXS30866D Owner's Manual page 25

Control Panel Features (continued)
Change Filter
When the Change Filter icon turns on, the air
filter needs to be replaced. After replacing the
air filter, press and hold the Fresh Air Filter
button for three seconds to turn the icon light
off. Changing the air filter approximately every
six months is recommended.
Ice On/Off
Press the Ice On/Off button for three seconds to
turn the icemaker On/Off.
Light
When you press the Light button, the
dispenser light will turn on and the indicator
will appear on the LED display.
Change Water Filter
When the Water Filter indicator turns on,
you need to change the water filter. After
changing the water filter, press and hold the
Change Filter button for three seconds to turn
the indicator light off. Change the water filter
approximately every six months.
Door Alarm
When power is connected to the refrigerator,
y
the door alarm is initially set to ON. When you
press the Door Alarm button, the display will
change to OFF and the Door Alarm function will
deactivate.
When either the refrigerator or the freezer
y
door is left open for more than 60 seconds, the
alarm tone will sound to let you know that the
door is open.
When you close the door, the door alarm will
y
stop.
Lock
The Lock function disables every other button
on the display.
When power is initially connected to the
y
refrigerator, the Lock function is off.
If you want to activate the
y
lock other buttons, press and hold the Lock
button for three seconds or more. The Lock
icon will display and the Lock function is now
enabled.
To disable the Lock function, press and hold
y
the Lock button for approximately three
seconds.
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store. When
activated OFF will display on the control panel
and the display will remain on for 20 seconds.
To deactivate / activate:
With either refrigerator door opened, press
and hold the Refrigerator and Ice Plus buttons
at the same time for five seconds. The control
panel will beep and the temperature settings
will display to confirm that Display Mode
is deactivated. Use the same procedure to
activate the Display Mode.
HOW TO USE 25
Lock function to