Ambient Temperature; Removing The Left Refrigerator Door; Measuring The Clearances; Removing/Assembling The Doors - LG LPXS30866D Owner's Manual

12 INSTALLATION

Ambient Temperature

Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be
adversely affected.

Measuring the Clearances

Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of the
refrigerator to open the doors, and at least
2 inches (5.08 cm) between the back of the
refrigerator and the wall.
24" (61 cm)

Removing/Assembling the Doors

Removing the Left Refrigerator Door

1
The water supply is connected to the
upper right part of the rear surface of the
refrigerator. Remove the ring in the joint
area. Hold the water supply connection
and gently push the Collet to detach the
water supply line as shown in
Detachment of the water supply line is
applicable only when detaching the left
refrigerator door.
2" (5.08 cm)
2
Remove the screw
at the top of the refrigerator. Lift the hook
(not visible), located at the bottom of the
front side of the cover
screwdriver.
.
Collet
NOTE
from the hinge cover
with a flat-head