Stereo System - Q Acoustics 3000 Series Q3070S User Manual

Stereo System

Connections
Connect a good quality stereo RCA phono lead to the L and R inputs on the 3070S and connect the other
end to the PRE OUT sockets on the rear of the amplifier.
The subwoofer will automatically add the L and R signals together so that no information is missed. If you
wish to use two subwoofers then you can run a single RCA phono cable to each subwoofer and thus have
a stereo subwoofer system.
Ensure that the L output on the amplifier goes to the left hand side subwoofer and R to the right hand side
to preserve the stereo image of the main speakers. The subwoofers will need to be placed close to their
respective main speakers and the set-up will need to be done separately for each subwoofer.
STEREO AMPLIFIER
RIGHT LEFT PRE OUT
+
L
FRONT LS
-
R
SUBWOOFER
LINE IN
LEFT /
MONO
RIGHT
12