Polaris Mazda BT50 RW-50/15 Installation Instructions Manual page 5

Step 4 - Prepare all the cabling in preparation for
1.Remove door rubber and the
driver's pillar trim
4. Remove trim around
instrument cluster panel
7. Tape Bluetooth mic cable onto strike and pull through to the
instrument cluster panel area
9. Tidy up cabling running down
the side of the driver's piller and
reinstall rubber and trim
the head unit to be installed.
A. External Bluetooth Microphone
2. Mount microphone in the
top right hand corner of the
5. Unplug instrument cluster
10. While the instrument cluster panel is re-
moved we suggest feeding
cated on
CD HOUSING AREA up to the
(Please refer to page 8 for actual wiring diagram)
windscreen
panel and remove
PLUG A & B lo-
HARNESS 1 FROM the
TOP SECTION
5
3. Use lever to drop steering
wheel column down
6. Feed short strike through A
piller hole and feed into the
instrument cluster panel area
8. You can now remove the tape
and feed the Bluetooth mic cable
into the TOP SECTION
11. This will then leave PLUG C & D
from HARNESS 1 hanging in the
CD HOUSING AREA