Table of Contents
Advertisement
QUICK REFERENCE GUIDE
When the manual refers to 'TOP SECTION' this is the area located where the OEM 3.5" screen was origi-
nally mounted
When the manual refers to 'CD HOUSING AREA' this is the area located where the OEM CD housing was
originally mounted
When the manual refers to 'OEM', this means original equipment manufacturer.
HARNESS 1
refers to the main patch loom as per the diagram below
HARNESS 2
refers to the secondary patch loom as per the diagram below
PLUG A
refers to the plug located on
located in the 'TOP SECTION'
PLUG B
refers to the plug located on
interface screen
PLUG C
refers to the plug located on
located in the 'CD HOUSING AREA'
PLUG D
refers to the plug located on
OEM CD housing
PLUG E
refers to the plug located on
RW-50/15 interface screen
Connect to RW-50 Interface
Plug A
e
Plug B
HARNESS 1
HARNESS 1
HARNESS 1
HARNESS 1
HARNESS 2
F. Wiring Diagram
Plug E
Connect to RW-50 interface
Connect to RW-50 interface
> this plug connects to the Mazda BT-50 OEM plug
> this plug connects into the back of RW-50/15
> this plug connects to the Mazda BT-50 OEM plug
> this plug connects into the back of the Mazda BT-50
> this plug connects into the back of the
Harness 2
Video out 1
Video out 2
DVR video input
AUX-IN video input
Reverse camera
Reverse camera trigger
Power amplifier box
Harness 1
2
Media USB
Microphone
Connect to the
power harness
of car original head unit
Plug C
Plug D
Connect to OEM CD Housing
Connect to car original head unit
Hide quick links:
Advertisement
Table of Contents
