AV input
You can display the video image output by the device connected
to this product.
External video component and the display on page 52
CAUTION
For safety reasons, video images cannot be viewed while your
vehicle is in motion. To view video images, stop in a safe place
and apply the parking brake.
Starting procedure (for AV
source)
You can display the video image output by the device connected
to video input.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Touch [AV Input].
X3700BHS
X5700BHS
Set the setting to "Source".
X4700BS
X2700BS
X1700S
Set the setting to "On".
4 Display the "AV source selection" screen.
5 Touch [AV].
The image is displayed on the screen.
AV
21
6/10
Full
Starting procedure (for camera)
You can display the image output by the camera connected to
video input.
1 Display the "System" setting screen.
2 Touch [Input/Output Settings].
3 Touch [AV Input] repeatedly, set to "Camera".
4 Display the "AV source selection" screen.
5 Touch [AV].
The image is displayed on the screen.
AV
Setting the video signal
When you connect this product to an AV equipment, select the
suitable video signal setting.
48
p You can operate this function only for the video signal input
into the AV input.
1 Display the "Video Setup" screen.
X3700BHS
X5700BHS
21
48
6/10
Full
2 Touch [Video Signal Setting].
3 Touch [AV].
4 Touch the item you want to set.
The following items are available:
Auto (default), PAL, NTSC, PAL-M, PAL-N, SECAM.
35