Power Amp (Sold Separately) - Pioneer AVH-X5700BHS Owner's Manual

Connection
L
3
f
d
SW
c e
g
h
c
1 To power supply
2 Power cord
3 Left
4 Right
5 Front speaker (STD) or high range speaker (NW)
6 Rear speaker (STD) or middle range speaker (NW)
7 White
8 White/black
9 Gray
a Gray/black
b Green
c Green/black
d Violet
e Violet/black
f Subwoofer (4Ω)
g When using a subwoofer of 70W (2Ω), be sure to connect the
subwoofer to the violet and violet/black leads of this unit. Do
not connect anything to the green and green/black leads.
h Not used.
i Subwoofer (4Ω) × 2
When a subwoofer is connected to this product instead of
a rear speaker, change the rear output setting in the initial
setting. The subwoofer output of this product is monaural.
 Switching the rear speaker output on page 40
With a two-speaker system, do not connect anything to the
speaker leads that are not connected to speakers.

Power amp (sold separately)

Without internal amp
Important
The speaker leads are not used when this connection is in
use.
R
1
4
5
1
d
7
i
e
1
9
With internal amp
Important
Front speaker and Rear speaker signals (STD) or middle range
speaker and high range speaker signals (NW) are output from
the speaker leads when this connection is in use.
1
9
1 System remote control
Connect to Blue/white cable.
2 Power amp (sold separately)
3 Connect with RCA cable (sold separately)
4 To Rear output (STD)
To middle range output (NW)
5 Rear speaker (STD)
Middle range speaker (NW)
6 To Front output (STD)
To high range output (NW)
7 Front speaker (STD)
High range output (NW)
8 To subwoofer output (STD)
To low range output (NW)
9 Subwoofer (STD)
Low range speaker (NW)
Change the speaker mode to standard mode (STD) or net-
work mode (NW).
3
2
4
5
3
2
6
7
3
2
8
9
3
2
8
9
 On first-time startup on page 9
You can change the RCA output of the subwoofer depending
on your subwoofer system.
The subwoofer output of this product is monaural.
iPhone and smartphone
For details on how to connect an external device using a
separately sold cable, refer to the manual for the cable.
For details concerning the connection, operations and
compatibility of iPhone, refer to Setup for iPod / iPhone or
smartphone on page 16.
For details concerning the connection and operations of
Android device, refer to Setup for iPod / iPhone or smartphone
on page 16.
iPhone with Lightning
connector
Connecting via the USB port
The USB interface cable for iPod / iPhone (CD-IU52) (sold sepa-
rately) is required for the connection.
1
3
2
1 USB port
2 USB cable 1.5 m (4 ft. 11 in.)
3 USB interface cable for iPod / iPhone (CD-IU52) (sold
separately)
4 iPhone with Lightning connector
4
51